I tried, but there was no way to properly solder the BME280 tiny sensor using the soldering iron alone. After destroying one sensor and almost damaging the PCB, it was clear I needed a hot air station for my work on the uRADMonitor-D project. I opted for the 858D, also reviewed on Dave’s EEVBlog. It’s my first time using a hot air station and the BME280 is really a very…
There was a tough road to get the 3x Portable Environmental Monitor beta prototypes to the Hackaday Headquarters in time, but the effort was worth it! With today’s official announcement, the project has advanced to Finalist in the Best Product competition, and to Semifinalist in the Hackaday Prize 2015 competition. Last year it was a thrill as well, with the uRADMonitor-A advancing to Semifinals. With this previous project spread all…
For the Portable Environmental Monitor beta release, both the project summary and the system design document presented some of the things to improve next. The first PCB was fine, but there was a linear regulator wasting power, that had to be replaced. Also, new ideas needed more hardware changes. Here is another hardware iteration to implement all that. The new changes include: – power efficient Lithium battery voltage converter, using…
The portable environmental monitor addresses pollution, the kind that we are unable to see but directly affects our health and causes life threatening diseases. Airborne toxic chemicals, radioactive dust and radioactive radon are correlated with cases of pulmonary cancer. Since our biological senses can do little to warn us of such possible dangers, the plan was to design the Portable environmental monitor as a first line detection and warning system….
It’s been a crazy run, trying to make this happen. After less then one month I now have the first functional hardware iteration or the first prototype. The Portable Environmental Monitor has been brought to life! All that’s left is finalising the enclosure (it will be a nice rugged aluminium enclosure, small enough to fit the palm of the hand, despite the many sensors packed inside) and the software (both…
A true hacker makes his own PCBs. Dual layer. And in the kitchen. Why so? Because doing them as DIY and not paying lots of money to some greedy company is some kind of hack. And if it wasn’t for all the issues I had with the Portable Environmental monitor along the road, I could have used the nice OSHPark voucher I won on Hackaday (Thanks again guys!). But I’ve…
The MiCS-VZ-89 Air Quality Sensor can detect carbon dioxide and volatile organic compounds. This article shows how to access its readings via I2C.
I got a few esp8266 modules back in 2014, shortly after they’ve been announced on HackaDay. I didn’t have much time for them, being caught with other projects, up until recently when the portable environmental monitor project needed a versatile wireless communication mechanism, low powered and if possible at a decent price. The esp8266 seemed the best candidate, but like with everything in life where nothing comes free, getting it…